Connection Guides
These are the official steps to connect your Cronus Zen to your console or PC. If you skip a step, your controller will disconnect.
Source: Official Cronus Connection Guide
PlayStation 5
Because Sony blocked third-party devices, you MUST use the Zen Link Wi-Fi Module or the USB Bypass method. We strongly recommend the Zen Link.
Xbox (All Models)
Xbox is plug-and-play. You do not need a bypass.
Plug the short USB-C cable into the back CONSOLE port of the Zen, and plug the other end into your Xbox.
Plug your Xbox controller into the left A1 port of the Zen using a high-quality data USB cable.
Make sure your Zen Studio "Emulator Output Protocol" is set to Xbox One X/S or AUTO.
Xbox Headset Fix
If your headset doesn't work when plugged into your Xbox controller, you must downgrade your Zen firmware to version 2.0.9-beta.43. See the Firmware Guide.
PC
Connecting to a PC is very simple. Your PC will think the Zen is a normal Xbox controller.
Plug the short USB-C cable into the back CONSOLE port of the Zen, and plug the other end into your PC.
Plug your controller into the left A1 port of the Zen.
Make sure your Zen Studio "Emulator Output Protocol" is set to Xbox 360. This gives you the best compatibility with PC games.
Top 3 Mistakes Everyone Makes
- Leaving the PROG cable plugged in: The right-side PROG cable is ONLY for Zen Studio. If you leave it plugged into your PC while trying to play a game, your controller will disconnect.
- Using a cheap "Charge-Only" cable: The cables that come with the Zen break easily. If your controller turns on but doesn't do anything, your cable is broken. Buy a data-sync USB-C cable.
- Using a USB Hub: Always plug the Zen directly into your console or PC. Do not use a USB hub or extension cable.